Description:

Use a high frequency oscillating ultrasonic atomizer. The water spray device, connector and circuit will produce high-frequency oscillating atomization force under its action.(Need to be equipped with a DC24V adapter.)
Safety simple operation: Put it in water and the voltage is 24V, there will be fog, no heating is required. Automatic induction water cut protection
A miniature ultrasonic diffuser humidifier containing air ions in dense fog can increase air humidity and fresh air.
This atomizer can add stunning atomization effects to your rockery, ponds, fish tanks, pools, and garden landscapes to filter unpleasant smells through electronic and ultrasonic technology
It is very suitable for indoor or outdoor fountains, water features and office use.

Specification:

Material:Stainless Steel
Voltage:24V
Power: 16W
Mist volume: 400-550ml/H
Nozzle:45x30mm/1.77x1.18inch
Use water depth: 40mm-70m

Package Includes:

1xUltrasonic Humidifier Mist Maker

Note:

Instructions
1. Find a container filled with clean water. There is no pure water, and the nozzle should be placed flat on the container filled with water.
2. The depth is enough to cover the black fountain on the side door of the atomizer head. The appropriate water level sensor is 1-2 cm. The water is too deep and it will not fog. Turn on the power and spray. Note that the power supply is not splash water.
3. Since the atomizer head has a great relationship with the water temperature, it may be started. We haven't tried an image that works so well, but it should work fine after a few minutes or a little more hot water.
4. Do not use too many water containers, otherwise the effect will not be good. The height of the bet is 2-7 cm. Do not exceed the haze. It will not fog below this height, or the haze is very small.