• The tester can be used as a digital brake fluid tester suitable for determinning braker fluid quality
• Developed for proffessional use in automotive repair shops and in serving
• Quality is tested and indicated on five LEDs in terms of "percent of water in the brake fluid
• Test DOT 3,DOT4,DOT5 brake fluid
• For universal automotive
• Material: Plastic
• Color: Black
• Size: approx.23*23*155mm

How to use:

• Ready for Brake Fluid Test: Unscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device
• To Check Fluid Quality: Press the button for power on,green LED will light up. Insert the tester into reservoir for one second then the test will be correctly indicated by LEDs. Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity

Product Labelling Indication:

• Green: Battery OK, i.e.: No water contained in the Brake Fluid
• Green / Yellow: Less than 1% of water content in Brake Fluid
• Green / Yellow / Yellow: Approx. 2% of water content in Brake Fluid
• Green / Yellow / Yellow / Red: Approx. 3% of water content in Brake Fluid. The Brake Fluid Should be Changed
• Green / Yellow / Yellow / Red / Red: At least 4% of water content in Brake Fluid.The brake fluid must be Changed Urgently! Extreme Danger!Attention

Attention:

• Replace battery if the green LED not light up any longer after you press power on button
• Wash the test probe with tap water after every use
• In case of skin contact with brake fluid,thoroughly wash the affected skin or clothing with water
• Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic!

• 1 x Brake Fluid Test Pen(battery is not included)