Description:

ISDS205C dual-channel digital oscilloscope, with "low-cost, high-performance" as the design goals.
Well-designed bandwidth of 20M, 48M sampling rate, 2 channels, alternating support X, Y and XY alternating pattern of two-channel virtual oscilloscope, spectrum analyzer, data recorder and logic analyzer.
Logic analyzer support our Logic software and Saleae Logic 2 kinds of software, Saleae Logic supports SPI, IIC, UART, etc. 16 kinds protocol analysis.
The device communicate with the PC via high speed USB2.0.

Specification:

Model: ISDS205C
Channels: 2
Impedance: 1MΩ 25pF
Coupling: AC/DC
Vertical resolution: 8-Bit
Gain range: -6 to 6 V (probe X1), -60 to 60 V (probe X10)
Vertical accuracy: ±3%
Time base range: 1 ns – 20 s
Input protection: Diode, 50Vpk
Autoset: Yes (10 Hz to 20 MHz)
Trigger mode: Auto, normal, and signal
Trigger type: No, rising edge, falling edge, rising edge or falling edge
Trigger level: Yes
Trigger source: CH1, CH2
Buffer size: 1 MB/CH
Bandwidth:20 MHz
Max sample:48 MS/s
Vertical mode: CH1, CH2, ADD, SUB, MUL
Display mode: X, Y-T, X-Y
Measurements: Yes
Wave save: Osc (Private), Excel and Bmp

Spectrum analyzers:
Channels: 2
Bandwidth: 20 MHz
Algorithm: FFT (18 windows), correlation
FFT points: 8 - 1048576/CHN
FFT measure: Harmonic (1-7), SNR, SINAD, ENOB, THD, SFDR
Filter processing: FIR filter supports arbitrary range of frequency sampling method and rectangle, bartlett, triangular, cosine, hanning, bartlett_hanning, hamming, blackman, blackman_Harris, tukey, Nuttall, FlatTop, Bohman, Parzen, Lanczos, Kaiser, gaussand dolph_chebyshev, window method design
IIR filter support "Butterworth", "Chebyshev I", "Chebyshev II", "Elliptic" type of filter design.

Data Recorder:
Channel: 2
Impedance: 1MΩ 25pF
Coupling: AC/DC
Vertical resolution: 8Bit
Gain range: -6 to 6 V (probe X1), -60 to 60 V (probe X10)
Sample 1 channel: 1K - 24M Hz; 2 channel: 1K - 16M Hz
Save file: The maximum 4G, recording time associated with the sampling rate

Logic analyzer:
Channel: 16
Sample: 250 K – 24 MHz (8 channel), 250 K – 16 MHz (16 channel)
Sample points: 1 M – 2 GB

Saleae Logic Logic Analyzer:
Channel: 8
Sample: 25 K – 24 MHz
Protocol analyzer: Atmel SWI, BiSS C, SPI, I2C, CAN, UART, I2S/PCM, DMX-512, JTAG, LIN, Manchester, 1-WIRE, UNI/O, Simple Parallel, MDIO, USB1.1, PS/2 Keyboard/Mouse
Sample points: 1 MB - 10 TB

DDS:
Wave: Sine, Square (Duty circle variable), Triangle, Up Sawtooth, Down Sawtooth
Amplitude: ≥9Vp-p(no load)
Impedance: 200Ω±10%
Offset: ±2.5V
Frequency range: 1 Hz – 20 MHz
Frequency resolution: 1Hz
Frequency steadiness: ±1×10-3
Frequency precision: ±5×10-3
Triangular wave linearity ≥98% (1Hz-10kHz)
Sine wave distortion ≤0.8% (1kHz)
Square wave rising/falling time ≤100ns
Square wave duty circle: 1%-99%

SWEEP
Sweep range: Fs to Fe
Sweep time range: 0.1 - 10 s
Amplitude: 0.5Vp-p - 10Vp-p

Package Includes:

1 Piece Oscilloscope
1 Piece CD Card
1 Piece Data Cable
2 Pieces Oscilloscope Probe
One Set of Logic Analyzer Probe

Note:

Color maybe slightly different due to different monitor.
The above size is measured by hand, please allow slightly difference. Thanks !