Description:

Pre-wired cord with a plug to install in your electrical socket, a output socket to plug your appliance.
The LED display show process temperature and setting temperature
This device is fairly simple to set up and adjust, switch to heating or cooling mode freely.
It is very accurate in keeping the temperature at the desired level.
Plug and play design, easy to use; it is suitable for freezer, conditioner, green house, dog house,incubators, etc.

Specification:

Product name: microcomputer digital thermostat
Model: ZFX-W2140
Measurement input: NTC thermistor L=1.2 m
Input plug: US plug, L=1 meter
Temperature measurement range: - 50 ~ 110 ℃
Accuracy: 0.1 ℃
Temperature control range: - 50 ~ 110 ℃
Temperature control precision: 0.1 ℃
Output capacity: 10A
Maximum power: 1500W / 2200W
Size: approx. 148 x 97 x 37mm

Size Chart:

1. How to use temperature control
According to the need to select the start temperature and stop temperature, temperature control system will automatically determine the working mode according to the settings.
Start temperature> stop temperature is cooling mode
For example, control the temperature of the house to be higher than 30 degrees to start fan ventilation, cool down to 28 degrees to stop, set the start temperature to 30 degrees, and stop setting to 28 degrees.
Start temperature < stop temperature is heating mode
For example, control the heating temperature to be less than 36 degrees to start heating, heat to 37 degrees to stop, set the start to 36 degrees, and stop setting to 37 degrees.
2. Temperature calibration method
In the normal display temperature state, press the calibration button once, the ADJ is displayed in the upper right corner, and the calibration value is displayed in the lower right corner. The measured temperature can be calibrated to ±10°C.

Package Includes:

1 Piece Temperature Controller Outlet