Description:

Wide voltage two - function remote control switch.
Wide voltage design for 12-50 volt power supply.(12V 24V 36V 48V universal)
Jog, self-lock, interlock, delay between 5 seconds to switch without the need to use a soldering iron or jumper cap.
The two relays are separately learned, and can match any button control of any style of the same frequency, which greatly facilitates the user to use one control or multiple control one combination.
Application scenarios: car / motorcycle / electric vehicle modification; LED lighting / garden light control; electric door remote control conversion; access control; electric curtains and other motor positive and negative control; and other intelligent control and security alarm field.

Specification:

Working voltage: DC 12-50V
Quiescent current: 10mA
Working current: 30mA-90mA
Working temperature: -20 ℃~80℃
Receive sensitivity: -103dBm
Working frequency: 433 frequency
Load range: less than 10A
Output mode: switch signal contact output
Material: Electronic Components
Product Detailed Size: Round Two Key: Diameter: 50mm/1.97inch
Thickness: 12mm/0.47inch
Controller: 115 x 90 x 40mm/4.53 x 3.54 x 1.57inch

Learn, remove methods and procedures
1. Key functions:
The two buttons on the controller are LEARNING button and mode switching button (MODEL).
2. Learning methods:
Press the learning button once, the indicator light flashes (enter the learning state), press any key of the remote control, and the indicator light flashes rapidly three times, indicating the success of the learning of relay 1. Press the learning key twice and repeat the above steps to learn the second relay.
3. Work mode switch :(when all relays are closed, the power can be disconnected first and then power on again.)
Click: press the mode switch button. If the indicator flashes once, it will go out, indicating that the setting is successful.
Interlock: press two mode switch buttons; If the indicator flashes twice, the interlock setting is successful.
Self-lock: press the switch button in three modes; The indicator flashes three times and then goes out, indicating that the self-lock setting is successful.
Delay for 5 seconds: press 4 mode switch button; The indicator lights flicker four times and then go out, indicating that the delay setting is successful.
4. Clear code: long press the learning button until the indicator light is always on.

Package Includes:

1 Piece 2 Buttons Wall Panel Remote Control
1 Pieces Wireless Switch