Description :

This valve is the replacement of the traditional float ballcock , which can be applied to various systems of high water tanks , pools , water towers of the industry and civil construction , etc .

Automatic control , low self - complementary water , water full automatic stop

Four intakes , large volume of water

Beautiful appearance , small size , practical , simple installation

Without electricity , easy to use , long life , low failure rate , saving water resources

Working pressure range : 0 . 2 - 10kg

Applicable Medium : clean water

Applicable Medium temperature : ≤ 70 ℃

Size ( L * W ): Approx . 83 * 71mm / 3 . 27 * 2 . 8inch

Diameter : Approx . 46mm / 1 . 81inch

Package Includes :

2 x Water Level Control Valve

Note :

This production belongs to the liquid level control valves . When installed , the float must be vertical . if you need to install from the top , a Elbow needed to connect the float valve and the inlet line . Firstly , the feed line should be fixed in horizontal plane and then connect the automatic water level control valve on the water inlet according to the standard . The main water inlet should be lined with the control valves &# 39 ; Normal Diameter . When using , the globe valve should be all open . If two valves are installed in the same pool , the two valves should be held in the same horizontal plane . Before installing , please clean the impurities in the pipes in case of blocking .

If the water quality is not good , then the valves need to be maintained properly .

If the users find the time of adding water becomes longer , he can just upload the water inlet and make it washed .