Description:

DC 12v 10A Relay 1-Channel RF Wireless Remote Control Switch Transmitter + Receiver, 433mhz, for Common Fixed and Learning Code.

In this listing has 6 type Transmitter + Receiver, they are different in shape, same in function. Turn on or turn off the receiver with transmitter (remote control). Transmitter (remote control) two botton function: A means ON, B means OFF; one button: press once means ON, press again means OFF.

New high-speed diode, more stable and durable, you can simply connect the line (please refer picture) and get it work.

For Home Automation / Light, Garage Door Opener, Motor Contorl, Access control, Alarm Systems, Other Home Security Project, etc..

Strong signal pass through walls or doors, control receiver from any place within a reliable distance.

Specification:

Small and sturdy durable.

Material: thicken burning-retardant ABS

Can at most store 16 different encoding.

Wiring: Fixed wiring posts (Please refer picture).

Receiver encoding type: learning code, Remote control encoding type: fixed code.

Remote control size: approx. 6x3x1cm / 2.4x1.2x0.4 inch, Receiver size: approx. 4.5x3.5x2cm / 1.8x1.4x0.8 inch

Output: switch output; normally open, common, normally closed end.

Operating Voltage: DC12V 10A

Frequency: 433MHZ

Remote control receiving distance: 50-80 meter

Receiving sensitivity: >-110dbm

Working temperature: -20 to 80 degree Celsius

Work mode description:

1.Inching: Learning remote control coding method: press the receiver board learning button once, until the indicator light flashes once, then press the remote control button. Learning finished.

2.Self-locking: Press the learn key for successive twice, the indicator light is normally on, immediately press the key on the remote control that you want to match. The indicator flash successive 3 times, means learning successfully.

3.Inter-locking: Press the learn key for successive 3 times, after the red light is normally on, immediately pressing the first key (A), then pressing the second key (B). The indicator flash successive 3 times, means learning successfully. Noted: the first key (A) refer ON, the second key (B) refer OFF.

4.Clear the data: Press the learn key for successive 5 seconds, the indicator light, then off, means it clear data successfully.

Package Includes:

1 Piece Remote Control

1 Piece Receiver

(Battery not included)