Description:

It is widely used in cast iron, stainless steel, steel, aluminum, titanium castings, ABS, PVC, FRP, ceramics, cement, wood, stone, acrylic bonding and equipment defects, cracking, corrosion and other problems.
Use this metal repair adhesive to repair cracked or damaged metal to make it perfect and make your DIY metal repair simple and quick.
Developed as an to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It can bond almost any clean surface without dirt and oil.
The adhesion is firm and stable, and it can be formed, tapped, filed, polished and drilled according to the application. It is resistant to high temperature and corrosion.
The preparation and application operation is simple: just mix, apply, and then let the mixed colloid repair the cracks and rest for 24 hours.

Specification:

Material: PE
Capacity: 50g+50g
A: Gray mud-like paste
B: White paste body
Volume Ratio: A:B – 1:1
Full cure time: 12 hours (25 °C)
Temperature resistance: -60 - 150°C
Hardness: 80 (Shore-D)

Size Chart:

Glue: 3.8x12.5cm/1.50x4.92inch
Accessories: 9.5x5cm/3.74x1.97inch

Package Includes:

1 Piece A Glue
1 Piece B Glue
1 Piece Accessories

Note:

1. Pay attention to ventilation and fire prevention when using.
2. A lot of heat will be released when the product is solidified, so the glue should not be mixed and used too much at one time.
3. The rubber shall not be covered incorrectly to avoid deterioration and failure.
4. Ventilation at room temperature, isolated fire storage.
5. Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing.